РАБОТНО ВРЕМЕ на магазина офиса и склада : ПОНЕДЕЛНИК, ВТОРНИК и СРЯДА от 09:00 до 18:00 tелефон. Download the free trial version below to get started. Double-click the downloaded file to install the software. The P400 Smart Array controller in my HP DL380G5 is indicating: Battery Status: Failed, Replace Battery 1 in the System Management Homepage. Also the IML indicates. How can I force HP Smart Array RAID controller to re- recognize drives? I have an HP Pro. Liant DL1. 80 G5 server with a Smart Array E2. RAID controller. The RAID controller is refusing to recognize inserted drives as an array. The story so far.. This server (our file server) needed an upgrade. Catalogna. Catalogna, voto tra tensioni. File nonostante i divieti, la polizia.Catalogna, è battaglia nei seggi: la polizia carica, molti feriti.It started with 8 x 2. GB drives: 2 in RAID1 for the OS5 in RAID5 for data. The plan was to replace the RAID5 array and hot spare with a RAID1. The old drives would be untouched in case any recovery was needed. The following process was used: Shut down server. Remove drives used in data array and hot spare, and label with their positions.Boot up the server and acknowledge errors about failed drives. Bloons 2 Christmas Expansion Hacked Game more. Insert new drives and create new RAID1. Format new array and restore data from tape backup. This procedure worked as expected. But some data was missed in the last backup, so I need to recover data from the drives in the original array. Here's what I've done: Shut down server. Remove drives used in new RAID1. Insert old drives according to position labels. Boot up the server. At this point, I get the following error: 1. Slot 0 Drive Array Not Configured. Drive positions appear to have changed. Run Array Diagnostics Utility (ADU) if previous positions are unknown. Then turn system power OFF and move drives to their original positions. I had assumed that the RAID metadata stored on the disks would be sufficient to bring the old RAID array back online, but that doesn't seem to be the case. I can hardly believe that the drives would be rendered inaccessible as soon as they are removed from the original RAID controller. Is there anything I can do to access the data on the old drives? If not, which RAID controllers support this, so I know what to buy in the future? I have already contacted HP support, and they were unable to help. Their recommendation was to recreate the RAID array and restore the data, but that doesn't really help my situation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |